Tannoy Di8DC Designer Install Outdoor speaker

Frequency Response (-3dB) (1) 65Hz - 30kHz Frequency Range (-10dB) (1) 53Hz - 35kHz System Sensitivity (1W @1m) (2) 91dB (1W = 2.83V for 8 Ohms) Nominal Coverage Angle 90 degrees conical Driver Complement
Dual Concentric™ constant directivity driver Low Frequency: 200mm (8.00") with resin treated multi fibre paper pulp cone High Frequency: 25mm (1.00") titanium dome with neodymium magnet system Crossover 1.5kHz - 2nd order LF, 2nd order HF (with dynamic HF protection) Directivity Factor (Q) 5.5 averaged 1kHz to 10kHz Directivity Index (DI) 7 averaged 1kHz to 10kHz Rated Maximum SPL Average: 111dB Peak: 117dB Power Handling (3) Average: 90W Programme: 180W Peak: 360W Recommended Amplifier Power 180W @ 8 Ohms Nominal Impedance 8 Ohms Di8 DCt only - Transformer Taps (top rotary switch) 70V: 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation 100V: 60W / 30W / 15W / OFF & Low Impedance operation CONSTRUCTION Enclosure High Impact Polystyrene (HIPS) rated IP64 to EN60529 (IEC529) Grille Steel, with weather resistant coating Finish Textured black or white paint (custom trim colours can be supplied pre-fitted to special order - minimum order quantity applies) Connectors Euroblock type removable locking connector with screw terminals with "loop through" facility Fittings 1 x K-Ball™ Bracket socket 2 x M8 yoke bracket inserts Supplied Accessories Yoke bracket

Black or White Each