Cosmetically, the Wyndsor Turntable uses some component parts already used in the Creek AR4 equipment rack. The adjustable feet and damping rings are identical to the AR4. The adjustable speed controller is made to match the Destiny range.
The Wyndsor turntable is supplied with a custom made Creek OEM300 arm. This has been made especially for Creek by Rega Research. Should a different arm be desired at any time, the turntable's versatility allows certain other arms to be fitted, depending on fixing requirements. The diameter of the standard arm boss is 23mm. However, two alternative sizes (24mm and 25mm) are included in the flight-case pack. The black acrylic base is fitted with three adjustable silver feet and spikes. The semi-transparent acrylic platter is driven by three silicon belts. The bearing is an inverted ball resting on a ceramic spindle, with oil-impregnated bronze bush.
A separate LP1 speed controller is supplied allowing you to switch to either 33.3 or 45 rpm and adjust the pitch. The case is made from custom extruded aluminium parts and is finished to look like a small Destiny amplifier. A 12â stroboscopic disc is included to assist in setting the correct rotational speed. There is a switch on the turntable motor which can override the speed controller. In addition, a heavy clamp is provided which should be placed on top of the spindle to help flatten the record and stop resonances or vibration from affecting its performance.
Shopping Cart 0 Items in Cart
